StoreMax

Of course - please contact your dealer in Switzerland directly to place your order.

A pair of scissors is marked on the cardboard boxes with a pre-drawn cut on the edge of the box. The packages can be opened with a cutter knife there. Please lift the individual components carefully out of the packaging (please do not pull!).

Our products are intended for self-assembly and are packed and delivered in individual parts. Depending on the products, the parts are packed in one or more sturdy corrugated cardboard boxes that are clearly labelled on the outside. Additional protection in the form of wooden slats, polystyrene and plastic fleece material is provided for sensitive parts. Orders containing more than nine boxes are partly shipped with additional packaging in the form of wooden crates. The customer is responsible for disposing of all of the packaging material.

Depending on size, the boxes are fitted with handles or recessed grips. We recommend that at least two persons carry the boxes due to their size and weight.

One single box can weigh up to 73 kg depending on the product.

If you do not unpack your Biohort product immediately, please ensure that the packages are stored in a dry place. Should the boxes get wet or damp, we can accept no liability for any subsequent damage to the goods. 

The boxes should be stored horizontally on a continuous, supporting surface.  

A foundation must be erected for the Storage Sheds, Equipment Locker and the MiniGarage. Please refer to our foundation tips.

A level, solid hard surface is required for the WoodStock, StoreMax and HighBoard products as well as for the Romeo Patio Locker. These products must be anchored to this hard surface with the screws and dowels supplied.

The outdoor boxes (LeisureTime Box, LoungeBox and StyleBox) must also be installed on a level, solid surface. These products do not need to be secured to the ground.

The Raised Vegetable Bed, Belvedere Planting Bed, DaVinci and MonAmi Composter can be installed on all level surfaces.

These products are supplied with a galvanised, coated metal base and an even, level, solid surface is required for installation. Asphalt driveways, concrete slabs in a gravel base as well as a frost-proof concrete foundations are suitable for this purpose. The boxes must be anchored to the hard surface with the fixing material supplied (screws and dowels) to ensure storm-proof installation. The surface area must be at least of the dimensions specified.

At least two people are needed to assemble the Biohort products.

No specific specialist skills are required for assembly. A detailed assembly manual is supplied with our products. You can download the assembly manual in advance from our website.

Specific socket and open-ended spanners are supplied. The following additional tools and aids are required or could be useful:

• A sharp knife for opening the box
• Flat-bladed and Phillips head screwdrivers
• Combination wrench, 13 mm opening
• Percussion drill with Ø 10 mm masonry drill (for fastening anchors)
• Retractable tape measure
• Stepladder
• Spirit level
• Cordless screwdriver (useful)
• Folding trestles x 2 (useful)
• Socket set (useful)

To avoid scratches, please also ensure that a suitable support surface is used for assembly.

As the Garden sheds and the equipment locker should be sealed on the surface that meets the foundation, we recommend a suitable sealant. This silicone-like compound should be acid-free and suitable for outdoor use.

This depends on a few factors:

• The skill of the "assemblers" and how many there are of them
• The weather conditions (never build in windy weather!)
• The space situation (at least 70 cm of space all-around)

Because we have years of experience, however, we can give guideline values. Please note that these estimates relate purely to the time taken for the work. Please read the assembly manual beforehand, including all notices. 

The detailed product assembly manual is supplied. This can also be downloaded from our website.

Check the delivered goods for completeness (size, colour, number) and possible damage. Ensure that you have enough space (at least 70 cm around the foundation) and helpers to assist with the assembly. You are advised to read the assembly manual in advance.

An even, level hard surface is essential for successful assembly. Leave a space of at least 70 cm all around the assembly area. Please open the boxes as noted on the boxes themselves. Should any parts be damaged, do not fit them, but inform customer services immediately, enclosing photos.  

Please place the individual parts on suitable surfaces/supports to avoid scratches. Wear gloves during assembly - some parts may have sharp edges. 

The foundation must be absolutely level for the successful assembly of our products.  

With the Biohort SmartBase^PLUS foundation for slopes and lawns, it is possible to compensate for a slope of 15 cm. Extension sets for the ground screws can also be provided on request, to achieve compensation of max. 55 cm overall.  

Please note that with this foundation, only one side of the shed can be raised. The foundation screws are not suitable for raising the entire shed. 

On a firm surface, the SmartBase can compensate for a slope of up to 4 cm.  

See our Foundation Tips for more detailed information. 

Safety advice for each product can be found on the opening pages of the assembly manual.

Basically: 
Keep all small parts or packaging materials supplied away from small children during assembly. Some components have sharp edges or protrude. This should be borne in mind when assembling the product and during daily use. Gloves are included and can be used if necessary.  

Note that relatively high temperatures may develop in the garden shed (heat generation similar to that in a car). Find out the storage conditions for the products stored in the garden shed from the respective manufacturers.    

BikeLift: 
The aluminium rail must be examined before use to check that it is dry.  
Other people should also be prevented from standing in the danger area when you are using it. Children may only use the BikeLift under adult supervision.

Our correctly assembled and properly anchored garden sheds are successfully tested in a wind tunnel at wind speeds of up to 150 km/h.  

Please make sure that they are properly anchored to the ground. Biohort cannot accept any liability for damage caused by insufficiently secured products, or lids/doors that are not locked. 

The Biohort storage solutions are all lockable and are therefore classed as "lockable containers" for insurance purposes. The Panorama, HighLine, AvantGarde and Neo Storage Sheds as well as the CasaNova Outbuilding are the most secure against burglary.

What is classed as burglary?
A burglary is theft accompanied by break-in. This occurs when the perpetrator gains access to insured premises by using force, tools, unlawfully produced keys or keys previously taken from another insured premises by burglary or robbery in order to steal insured items. A burglary also occurs if the perpetrator enters or creeps into insured premises by overcoming difficult obstacles or gains entry through openings not intended for access. Finally, entry into locked containers and the theft of items contained therein also constitutes burglary.

Biohort products need very little care due to the high-quality materials used and careful workmanship. Simply lubricate the lock and hinges every year and regularly clean the StoreMax sliding rails or treat them with silicone spray. In the event of soiling due to weather and environmental conditions, clean using just water and the Biohort CleanLine Universal Cleaner. A high-pressure cleaner can also be used (maintain a distance of at least 10 cm between the lance and the lacquer. Do not use a steam cleaner. Max. pressure approximately 80 bar). To preserve the lacquer surface, we recommend Biohort CleanLine Preservation, which provides the lacquer surface with optimum protection against weather and environmental conditions. 

The gutter should be cleaned several times a year, to ensure optimum drainage. If the gutter is blocked, it may overflow. No liability can be accepted for any resultant damage.  

IMPORTANT: Sea air/ambient air containing salt water and/or salt, aggressive and abrasive cleaning agents, road salt, fertilisers, fresh concrete, screed materials and other chemical substances (never store this type of product in the open) can attack the lacquer and zinc surface, thereby leading to corrosion. Warranty claims are no longer valid in such cases. 

Biohort products are not designed to house animals.

The storage boxes are not delivered with castors. Two rubberised, rigid castors (optional accessory) can be attached to the StyleBox.

However, if you would like to fit castors to the other boxes, furniture castors can be attached to a base plate and the box fitted on top. Please note that most of our products must be secured to a base or subsurface. Biohort cannot accept liability for any damage caused by insufficiently secured products.

Biohort products are subject to the DIN 4102 standard and are classified according to building material rating A1 under products without combustible components.

Biohort products can withstand the following surface loads when applied evenly:

Highline, Panorama, AvantGarde, Neo and Europa Garden Sheds, MiniGarage, Woodstock and Equipment Locker: 150 kg/m²
CasaNova: 215 kg/m²
StoreMax: 100 kg/m²
HighBoard, LoungeBox, LeisureTime Box, Romeo, Alex, StyleBox: 30 kg

Biohort products are rainwater-proof.

Passive ventilation is provided for in our Biohort products, except for the CasaNova Outbuilding. In this case, the acrylic glass panel can be opened on two sides for ventilation purposes. ATTENTION: This sliding function is not included in the double version of the acrylic glass skylight, which is available as an option.

LeisureTime Box/Parcel Box/LoungeBox:
4–6 plastic feet are mounted depending on the size of the storage box. These are not height-adjustable.

StyleBox:
The adjustable feet are height-adjustable from 1 to 3 cm.

HighBoard:
The height of both feet can be adjusted up to 2 cm on the front left and right. As the floor panel should rest entirely on the hard surface, feet height can be adjusted only for precise alignment.

StoreMax:
No adjustable feet are fitted. In the StoreMax, the floor panel rests entirely on the hard surface. A completely level surface is therefore required.

Romeo Patio Locker:
The feet can be adjusted by up to 2.5 cm on the inside.

Please note that Biohort storage boxes such as the LeisureTime Box, Parcel Box, Romeo Patio Locker, StoreMax, HighBoard, StyleBox and LoungeBox offer secure storage against driving rain. However, there are ventilation slits for air circulation. Seat covers/cushions/blankets absorb any humidity and should therefore not be stored in the outdoor boxes in winter due to the risk of mould stains.

LeisureTime Box/Parcel Box/LoungeBox/StyleBox:
The floor of these outdoor boxes can withstand an even load of 20 kg. We recommend placing an XPS hard foam panel with a thickness of 2 cm underneath the box in order to store heavier objects (inside the adjustable feet).

HighBoard/StoreMax/Patio Locker:
These storage boxes are delivered with a base plate underlay. A full surface load of up to 200 kg/m² can therefore be applied.

Biohort products provide protection against driving rain and are therefore ideal to store/stow away garden and leisure items.

The products can be installed on a roof terrace if building regulations are met.

IMPORTANT:Ensure that products are anchored securely in case of stormy weather (fixing material supplied). Biohort cannot accept any liability for damage caused by insufficiently secured products.

Only products with a door handle (Neo/HighLine/AvantGarde/Panorama) can be incorporated into a keyed alike system or replaced with a new cylinder lock. The cylinder for the mortise lock is 54 mm long with a central division (27 mm each).

Biohort colours do not correspond to any RAL number but some of them share similar features to RAL numbers. We recommend that you view the original colour samples at our dealers. If you wish, you can also request a colour sample chart from Biohort.

From the time the power is supplied during the initial commissioning, there is a 10-second time window to pair the remote control with the control unit . During this time, the remote control must be pressed for 3 seconds. If the pairing does not work, the control unit must be disconnected from the power supply for 1 minute. Then the above instructions shall be repeated.

To re-establish the connection between the remote control and the control unit, the power supply must be disconnected. The power supply may then be reconnected after approximately 1 minute. From this point on, there is a 10 second window to pair the remote control. To do so, press and hold the remote control for 3 seconds during these 10 seconds. If the pairing does not work, unplug the control unit again for 1 minute and repeat the above instructions.

We strongly advise against the cutting or shortening of the LED strip, as this would result in a loss of protection against moisture.

The Sun Screen consists of a polyester/PVC (30/70%) fabric with 5% openness and a thickness of 0.57 mm.

It is not intended for the Pergola to be mounted directly next to a house wall. It may be placed next to it, but all 4 uprights must be attached to the foundation. Please note that all of the uprights are designed with rainwater drainage.

No, the electric drive can only be mounted on the drive support on the left (when standing in front of the Pergola). The drive support can be installed at the rear or front.

During the winter, it can generally be assumed that the temperature inside the product will equate to the outside temperature as there is no insulation.

Biohort products can heat up on exposure to prolonged sunlight in the same way as cars. Regular ventilation is required in this respect in order to regulate the temperature.

Biohort products do not emit any sounds on exposure to cold and heat as the steel plate has a very low material expansion coefficient (considerably lower than aluminium, plastic or concrete, etc.).

Replacement keys for the stainless steel door handle with standard cylinder lock (CasaNova, Neo, Panorama, HighLine, AvantGarde from the 2016 model onwards) can be ordered from a locksmith on presentation of the original key. Please therefore keep one of the three keys supplied in a safe place. If a key is no longer held in stock, the integrated cylinder must be drilled.

Keys for the T-handle cylinder lock or T-bar cylinder lock (Europa Garden Shed, Equipment Locker, Romeo Patio Locker, MiniGarage, WoodStock, StoreMax, HighBoard, LoungeBox, LeisureTime Box, Alex) can be reordered through the company Carney in Germany. The lock number (engraved on the lock) must be stated.

Carney can be contacted at:

CARNEY GmbH
Westerwaldstr. 96
57299 Burbach | Germany
Tel. +49 2736 3562
info@carney-gmbh.com
www.carney-gmbh.com